mirror of
https://github.com/ale1800/ESP-360-REMOTE.git
synced 2025-06-16 12:54:03 -03:00
I suggest you to buy also the right angle pin I soldered on the RF modules.
-
I used these for the 3-pin transmitter module (STX883Pro). They have the standard pitch of 2.54 but they are thin enough to be inserted in the female connector on the board You have to buy at least 4 (2x2) and then cut one.
-
For the receiver module (SRX883Pro), pins are these. Also with these you have to cut one (I connected it to the board only with 5 pins out 6)
Pay attention if you need the RF modules in 433MHz or 315MHz version. And then buy the spring antenna accordingly, like these ones.
If you let the manufacturer assemble the board, remember to ask them to bend the IR leds to 45°, otherwise the will solder them straight.