# This provides IR buttons for controlling a Lasko fan.
# 
# I think Lasko may use the same codes for different meanings, so your mileage may vary on the button names.
#
# I used the same technique documented at https://ryfow.com/articles/esp-360-remote-rc300/ to find these codes.
# The tricky part was figuring out that carrier_frequency: 38000 is required. I eventually guessed my way into that.

remote_receiver:
  - id: IR_RX
    pin: 
      number: GPIO19
      inverted: true
    idle: 100ms
    dump: raw

remote_transmitter:
  - id: IR_TX
    pin: GPIO13
    carrier_duty_percent: 50%

button:
  - platform: template
    name: "Fan Power"
    on_press:
      remote_transmitter.transmit_raw:
        code: [1313, -383, 1312, -382, 460, -1234, 1313,  -382, 1312, -382, 460, -1235, 466, -1229, 460, -1234, 462, -1233, 462, -1232, 461, -1233, 1314]
        carrier_frequency: 38000
        repeat:
          times: 10
          wait_time: 7200us
        transmitter_id: IR_TX
  - platform: template
    name: "Fan Speed"
    on_press:
      remote_transmitter.transmit_raw:
        code: [1282, -414, 1307, -387, 454, -1240, 1306, -389, 1279, -415, 454, -1240, 431, -1263, 456, -1238, 432, -1262, 457, -1238, 1308, -387, 430]
        carrier_frequency: 38000
        repeat:
          times: 10
          wait_time: 8000us
        transmitter_id: IR_TX

  - platform: template
    name: "Fan Timer"
    on_press:
      remote_transmitter.transmit_raw:
        code: [1325, -372, 1320, -374, 471, -1223, 1322, -372, 1325, -370, 471, -1223, 471, -1223, 472, -1222, 1323, -373, 471, -1222, 471, -1223, 470]
        carrier_frequency: 38000
        repeat:
          times: 10
          wait_time: 8000us
        transmitter_id: IR_TX

  - platform: template
    name: "Fan Ion"
    on_press:
      remote_transmitter.transmit_raw:
        code: [1325, -372, 1325, -369, 472, -1221, 1327, -369, 1324, -370, 474, -1219, 1326, -370, 473, -1221, 472, -1222, 499, -1195, 476, -1121, 572, -2133, 172]
        carrier_frequency: 38000
        repeat:
          times: 10
          wait_time: 8000us
        transmitter_id: IR_TX

  - platform: template
    name: "Fan Oscillate"
    on_press:
      remote_transmitter.transmit_raw:
        code: [1315, -382, 1313, -381, 462, -1231, 1314, -382, 1314, -380, 464, -1229, 465, -1230, 1287, -409, 463, -1230, 464, -1230, 466, -1229, 464]
        carrier_frequency: 38000
        repeat:
          times: 10
          wait_time: 8000us
        transmitter_id: IR_TX