esphome:
  name: soggiorno_remote

esp32:
  board: esp32doit-devkit-v1
  framework:
    type: arduino

# Enable logging
logger:

ota:
  password: ""

wifi:
  ssid: "name"
  password: "pwd"
  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Esp-Remote-Def Fallback Hotspot"
    password: "BackupPwd"

captive_portal:
    

i2c:
  sda: 21
  scl: 22
  scan: true
  id: bus_a

sensor:
  - platform: shtcx
    temperature:
      name: "Living Room Temperature"
      id: "Temperature"
      filters:
        - median: 
            window_size: 5
            send_every: 1
        - offset: -3.7
    humidity:
      name: "Living Room Humidity"
      id: "Humidity"
      filters:
        - offset: +19.1  
        - median: 
            window_size: 5
            send_every: 1  
    address: 0x70
    update_interval: 300s
  - platform: bh1750
    name: "BH1750 Illuminance"
    filters:
        - multiply: 5
    address: 0x23
    update_interval: 5s
  - platform: internal_temperature
    name: "Internal Temperature"
    filters:
      - median: 
          window_size: 5
          send_every: 1


remote_receiver:
  - id: RF_RX
    pin: 
      number: GPIO5
      inverted: True
    dump: 
      #- raw
      - rc_switch
    tolerance: 35%
    filter: 200us
    idle: 4ms
    buffer_size: 10kb 
    on_rc_switch:
      - homeassistant.event:
          event: esphome.rf_code_received
          data:
            protocol: !lambda 'return x.protocol;'
            code: !lambda 'return x.code;' 
  - id: IR_RX
    pin: 
      number: GPIO19
      inverted: True
    dump: all
    on_raw:
       - homeassistant.event:
          event: esphome.ir_raw_code_received
          data:
            code: !lambda '
            reverse(x.begin(), x.end());
            std::string str = "";
            for (auto it = x.begin(); it != x.end(); ++it)
            {
              str += to_string(*it);
              
              if (it != x.end() - 1) {
                str += ",";
                str += " ";
              }
            }
            return esphome::to_string("[" + str + "]");'   
    on_pronto:
       - homeassistant.event:
          event: esphome.ir_pronto_code_received
          data:
            code: !lambda 'return x.data;'
    on_lg:
       - homeassistant.event:
          event: esphome.ir_lg_code_received
          data:
            data: !lambda 'return x.data;'
            nbits: !lambda 'return x.nbits;'
    on_panasonic:
       - homeassistant.event:
           event: esphome.ir_panasonic_code_received
           data:
            address: !lambda 'return x.address;'
            command: !lambda 'return x.command;'
remote_transmitter:
  - id: RF_TX
    pin: GPIO18
    carrier_duty_percent: 100%
  - id: IR_TX
    pin: GPIO13
    carrier_duty_percent: 50%


web_server:
  port: 80


switch:
  - platform: template
    name: "Luce"
    optimistic: true
    on_turn_on:
      - remote_transmitter.transmit_rc_switch_raw:
          transmitter_id: RF_TX
          protocol:
            pulse_length: 650
            inverted: True
            sync: [1, 10]
            zero: [1 ,2]
            one:  [2, 1]
          code: "10110000000000010001"
          repeat: 
            times: 10
            wait_time: 30ms
    on_turn_off:
      - remote_transmitter.transmit_rc_switch_raw:
          transmitter_id: RF_TX
          protocol:
            pulse_length: 650
            inverted: True
            sync: [1, 10]
            zero: [1 ,2]
            one:  [2, 1]
          code: "10110000000000000000"
          repeat: 
            times: 10
            wait_time: 30ms 
  - platform: template
    name: "Presa Luce"
    optimistic: true
    on_turn_on:
      - remote_transmitter.transmit_rc_switch_raw:
          transmitter_id: RF_TX
          protocol:
            pulse_length: 650
            inverted: True
            sync: [1, 10]
            zero: [1 ,2]
            one:  [2, 1]
          code: "10110000000011110000"
          repeat: 
            times: 10
            wait_time: 30ms
    on_turn_off:
      - remote_transmitter.transmit_rc_switch_raw:
          transmitter_id: RF_TX
          protocol:
            pulse_length: 650
            inverted: True
            sync: [1, 10]
            zero: [1 ,2]
            one:  [2, 1]
          code: "10110000000011100001"
          repeat: 
            times: 10
            wait_time: 30ms 
  - platform: template
    name: "LG TV"
    turn_on_action:
      remote_transmitter.transmit_lg:
        transmitter_id: IR_TX
        data: 0x20DF10EF
        nbits: 32
  - platform: template
    name: "Umidificatore"
    turn_on_action:
      remote_transmitter.transmit_lg:
        transmitter_id: IR_TX
        data: 0x00FF00FF
        nbits: 32
    turn_off_action:
      remote_transmitter.transmit_lg:
        transmitter_id: IR_TX
        data: 0x00FF00FF
        nbits: 32
  - platform: gpio
    pin: 12
    name: "Status Led"
    restore_mode: ALWAYS_OFF
  - platform: restart
    name: "Riavvia"

climate:
  - platform: coolix      
    name: "Living Room AC"
    transmitter_id: IR_TX
    sensor: Temperature
    receiver_id: IR_RX


api:
  services:
    - service: send_ir_raw
      variables:
        command: int[]
      then:
        - remote_transmitter.transmit_raw:
            transmitter_id: IR_TX
            code: !lambda 'return command;'
    - service: send_rf_raw
      variables:
        protocol_number: int
        raw_data: string
      then:
        - remote_transmitter.transmit_rc_switch_raw:
            transmitter_id: RF_TX
            protocol: !lambda 'return  esphome::remote_base::RC_SWITCH_PROTOCOLS[protocol_number];'
            code: !lambda 'return raw_data;'