Update README.md

Add example IR buttons for a Lasko fan

ESPHome Configuration/esp360remote.yaml

@@ -48,26 +48,31 @@ ota:
   - platform: esphome
 
 wifi:
-
+  on_connect:
+    - delay: 5s  # Gives time for improv results to be transmitted
+    - ble.disable:
+  on_disconnect:
+    - ble.enable:
   # Enable fallback hotspot (captive portal) in case wifi connection fails
   ap:
     ssid: "${name}"
     password: ""
 
+
+esp32_improv:
+  authorizer: none
+
+
 # Sets up the improv via serial client for Wi-Fi provisioning
 improv_serial:
 
-esp32_improv:
-  authorizer: false
 
 dashboard_import:
-  package_import_url: github://esphome/esphome-project-template/project-template-esp32.yaml@v6
+  package_import_url: github://ale1800/ESP-360-REMOTE/ESPHome/esp360remote.yaml@main
-  import_full_config: false # or true
+  import_full_config: true # or true
 
-web_server:
-  port: 80  
 
-captive_portal:  
+#captive_portal:
 
 #i2c bus definition
 i2c:
@@ -82,14 +87,14 @@ i2c:
 sensor:
   - platform: shtcx
     temperature:
-      name: "Living Room Temperature"
+      name: "ESP360Remote Temperature"
       filters:
         - median: 
             window_size: 5
             send_every: 1
         - offset: -3.7
     humidity:
-      name: "Living Room Humidity"
+      name: "ESP360Remote Humidity"
       filters:
         - median: 
             window_size: 5

ESPHome/esp360remote.yaml

@@ -0,0 +1,181 @@
+substitutions:
+  name: "esp360remote"
+  friendly_name: "ESP360Remote"
+  project_name: "ale1800.ESP360Remote"
+  project_version: "2.0"
+
+esphome:
+  name: "${name}"
+  name_add_mac_suffix: true
+  project:
+    name: "${project_name}"
+    version: "${project_version}"
+
+esp32:
+  board: esp32dev
+  framework:
+    type: arduino
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+  services:
+    - service: send_ir_raw
+      variables:
+        command: int[]
+      then:
+        - remote_transmitter.transmit_raw:
+            transmitter_id: IR_TX
+            code: !lambda 'return command;'
+    - service: send_rf_raw
+      variables:
+        protocol_number: int
+        raw_data: string
+        repeat_times: int
+        wait_time: int
+      then:
+        - remote_transmitter.transmit_rc_switch_raw:
+            transmitter_id: RF_TX
+            protocol: !lambda 'return  esphome::remote_base::RC_SWITCH_PROTOCOLS[protocol_number];'
+            code: !lambda 'return raw_data;'
+            repeat:
+              times: !lambda 'return repeat_times;'
+              wait_time: !lambda 'return wait_time;' 
+              
+ota:
+  - platform: esphome
+
+wifi:
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    password: ""
+
+web_server:
+  port: 80
+
+# Sets up the improv via serial client for Wi-Fi provisioning
+improv_serial:
+
+
+dashboard_import:
+  package_import_url: github://ale1800/ESP-360-REMOTE/ESPHome/esp360remote.yaml@main
+  import_full_config: true
+
+
+captive_portal:  
+
+#i2c bus definition
+i2c:
+  sda: 21
+  scl: 22
+  scan: true
+  id: bus_a
+
+#Offsets have been added to the measurements taken. 
+#These are necessary due to the heat generated by the PCB, the second layer of the board, and the case. 
+#This way, sufficiently accurate values are obtained for automations
+sensor:
+  - platform: shtcx
+    temperature:
+      name: "ESP360Remote Temperature"
+      filters:
+        - median: 
+            window_size: 5
+            send_every: 1
+        - offset: -3.7
+    humidity:
+      name: "ESP360Remote Humidity"
+      filters:
+        - median: 
+            window_size: 5
+            send_every: 1
+        - offset: +19.1   
+    address: 0x70
+    update_interval: 300s
+  - platform: bh1750
+    name: "BH1750 Illuminance"
+    filters:
+      - multiply: 5
+    address: 0x23
+    update_interval: 1s
+
+#Setting up IR and RF receivers
+remote_receiver:
+  - id: RF_RX
+    pin: 
+      number: GPIO5
+      inverted: True
+    dump: 
+#      - raw  #(delete # for raw data)
+      - rc_switch
+    tolerance: 35%
+    filter: 200us
+    idle: 4ms
+    buffer_size: 10kb
+    on_rc_switch:
+      - homeassistant.event:
+          event: esphome.rf_code_received_test
+          data:
+            protocol: !lambda 'return x.protocol;'
+            code: !lambda 'return x.code;' 
+  - id: IR_RX
+    pin: 
+      number: GPIO19
+      inverted: true
+      mode:
+       input: true
+       pullup: true
+    dump: all
+
+
+    on_raw:
+       - homeassistant.event:
+          event: esphome.ir_raw_code_received
+          data:
+            code: !lambda '
+            reverse(x.begin(), x.end());
+            std::string str = "";
+            for (auto it = x.begin(); it != x.end(); ++it)
+            {
+              str += to_string(*it);
+              str += ",";
+              if (it != x.end() - 1) str += " ";
+            }
+            if (str.size() > 0)  str.erase( str.end() - 2);
+            return esphome::to_string("[" + str + "]");'   
+    on_pronto:
+       - homeassistant.event:
+          event: esphome.ir_pronto_code_received
+          data:
+            code: !lambda 'return x.data;'
+    on_lg:
+       - homeassistant.event:
+          event: esphome.ir_lg_code_received
+          data:
+            data: !lambda 'return x.data;'
+            nbits: !lambda 'return x.nbits;'
+    on_panasonic:
+       - homeassistant.event:
+           event: esphome.ir_panasonic_code_received
+           data:
+            address: !lambda 'return x.address;'
+            command: !lambda 'return x.command;'
+
+#Setting up IR and RF transmitters
+remote_transmitter:
+  - id: RF_TX
+    pin: GPIO18
+    carrier_duty_percent: 100%
+  - id: IR_TX
+    pin: GPIO13
+    carrier_duty_percent: 50%
+
+#Status LED 
+switch:
+  - platform: gpio
+    pin: 12
+    name: "Status Led"
+    restore_mode: ALWAYS_ON

Hardware/Production/readme.md

@@ -0,0 +1,10 @@
+ I suggest you to buy also the right angle pin I soldered on the RF modules.
+ 
+ - I used [these](https://www.lcsc.com/product-detail/_XFCN-_C781823.html) for the 3-pin transmitter module ([STX883Pro](https://www.nicerf.com/ask-modules/ask-transmitter-module-stx883pro.html)). 
+ They have the standard pitch of 2.54 but they are thin enough to be inserted in the female connector on the board  **You have to buy at least 4 (2x2)** and then cut one. 
+ 
+ - For the receiver module ([SRX883Pro](https://www.nicerf.com/ask-modules/ask-receiver-module-srx883pro.html)), pins are [these](https://www.lcsc.com/product-detail/_HCTL-_C2905972.html). Also with these you have to cut one (I connected it to the board only with 5 pins out 6)
+
+Pay attention if you need the RF modules in 433MHz or 315MHz version. And then buy the spring antenna accordingly, like [these ones](https://www.lcsc.com/products/Antennas_912.html).
+
+If you let the manufacturer assemble the board, remember to ask them to bend the IR leds to 45°, otherwise the will solder them straight.

README.md

@@ -2,7 +2,8 @@
 ## An all-in-one remote based on the ESP32-WROOM-32E
 
 
-- ## ESP 360 Remote on [CrowdSupply](https://www.crowdsupply.com/aaelectronics/esp-360-remote)
+- ## ~~ESP 360 Remote on [CrowdSupply](https://www.crowdsupply.com/aaelectronics/esp-360-remote)~~ (Out of stock)
+- ## If you want, you can build it by yourself. Productions files are [here](https://github.com/ale1800/ESP-360-REMOTE/tree/main/Hardware/Production)
 
 - ## ESP 360 Remote on [Discord](https://discord.gg/PsrK3KDkRy)
 

Some remotes configurations/IR/Lasko 4821/Lasko-4821_configuration.txt

@@ -0,0 +1,75 @@
+# This provides IR buttons for controlling a Lasko fan.
+# 
+# I think Lasko may use the same codes for different meanings, so your mileage may vary on the button names.
+#
+# I used the same technique documented at https://ryfow.com/articles/esp-360-remote-rc300/ to find these codes.
+# The tricky part was figuring out that carrier_frequency: 38000 is required. I eventually guessed my way into that.
+
+remote_receiver:
+  - id: IR_RX
+    pin: 
+      number: GPIO19
+      inverted: true
+    idle: 100ms
+    dump: raw
+
+remote_transmitter:
+  - id: IR_TX
+    pin: GPIO13
+    carrier_duty_percent: 50%
+
+button:
+  - platform: template
+    name: "Fan Power"
+    on_press:
+      remote_transmitter.transmit_raw:
+        code: [1313, -383, 1312, -382, 460, -1234, 1313,  -382, 1312, -382, 460, -1235, 466, -1229, 460, -1234, 462, -1233, 462, -1232, 461, -1233, 1314]
+        carrier_frequency: 38000
+        repeat:
+          times: 10
+          wait_time: 7200us
+        transmitter_id: IR_TX
+  - platform: template
+    name: "Fan Speed"
+    on_press:
+      remote_transmitter.transmit_raw:
+        code: [1282, -414, 1307, -387, 454, -1240, 1306, -389, 1279, -415, 454, -1240, 431, -1263, 456, -1238, 432, -1262, 457, -1238, 1308, -387, 430]
+        carrier_frequency: 38000
+        repeat:
+          times: 10
+          wait_time: 8000us
+        transmitter_id: IR_TX
+
+  - platform: template
+    name: "Fan Timer"
+    on_press:
+      remote_transmitter.transmit_raw:
+        code: [1325, -372, 1320, -374, 471, -1223, 1322, -372, 1325, -370, 471, -1223, 471, -1223, 472, -1222, 1323, -373, 471, -1222, 471, -1223, 470]
+        carrier_frequency: 38000
+        repeat:
+          times: 10
+          wait_time: 8000us
+        transmitter_id: IR_TX
+
+  - platform: template
+    name: "Fan Ion"
+    on_press:
+      remote_transmitter.transmit_raw:
+        code: [1325, -372, 1325, -369, 472, -1221, 1327, -369, 1324, -370, 474, -1219, 1326, -370, 473, -1221, 472, -1222, 499, -1195, 476, -1121, 572, -2133, 172]
+        carrier_frequency: 38000
+        repeat:
+          times: 10
+          wait_time: 8000us
+        transmitter_id: IR_TX
+
+  - platform: template
+    name: "Fan Oscillate"
+    on_press:
+      remote_transmitter.transmit_raw:
+        code: [1315, -382, 1313, -381, 462, -1231, 1314, -382, 1314, -380, 464, -1229, 465, -1230, 1287, -409, 463, -1230, 464, -1230, 466, -1229, 464]
+        carrier_frequency: 38000
+        repeat:
+          times: 10
+          wait_time: 8000us
+        transmitter_id: IR_TX
+