Update README.md

ESPHome Configuration/esp360remote.yaml

@@ -48,25 +48,31 @@ ota:
   - platform: esphome
 
 wifi:
-
+  on_connect:
+    - delay: 5s  # Gives time for improv results to be transmitted
+    - ble.disable:
+  on_disconnect:
+    - ble.enable:
   # Enable fallback hotspot (captive portal) in case wifi connection fails
   ap:
     ssid: "${name}"
     password: ""
 
-web_server:
+
-  port: 80
+esp32_improv:
+  authorizer: none
+
 
 # Sets up the improv via serial client for Wi-Fi provisioning
 improv_serial:
 
 
 dashboard_import:
-  package_import_url: https://github.com/ale1800/ESP-360-REMOTE/blob/main/ESPHome%20Configuration/esp360remote.yaml
+  package_import_url: github://ale1800/ESP-360-REMOTE/ESPHome/esp360remote.yaml@main
   import_full_config: true # or true
 
 
-captive_portal:  
+#captive_portal:
 
 #i2c bus definition
 i2c:

Hardware/Production/readme.md

@@ -0,0 +1,10 @@
+ I suggest you to buy also the right angle pin I soldered on the RF modules.
+ 
+ - I used [these](https://www.lcsc.com/product-detail/_XFCN-_C781823.html) for the 3-pin transmitter module ([STX883Pro](https://www.nicerf.com/ask-modules/ask-transmitter-module-stx883pro.html)). 
+ They have the standard pitch of 2.54 but they are thin enough to be inserted in the female connector on the board  **You have to buy at least 4 (2x2)** and then cut one. 
+ 
+ - For the receiver module ([SRX883Pro](https://www.nicerf.com/ask-modules/ask-receiver-module-srx883pro.html)), pins are [these](https://www.lcsc.com/product-detail/_HCTL-_C2905972.html). Also with these you have to cut one (I connected it to the board only with 5 pins out 6)
+
+Pay attention if you need the RF modules in 433MHz or 315MHz version. And then buy the spring antenna accordingly, like [these ones](https://www.lcsc.com/products/Antennas_912.html).
+
+If you let the manufacturer assemble the board, remember to ask them to bend the IR leds to 45°, otherwise the will solder them straight.

README.md

@@ -2,7 +2,8 @@
 ## An all-in-one remote based on the ESP32-WROOM-32E
 
 
-- ## ESP 360 Remote on [CrowdSupply](https://www.crowdsupply.com/aaelectronics/esp-360-remote)
+- ## ~~ESP 360 Remote on [CrowdSupply](https://www.crowdsupply.com/aaelectronics/esp-360-remote)~~ (Out of stock)
+- ## If you want, you can build it by yourself. Productions files are [here](https://github.com/ale1800/ESP-360-REMOTE/tree/main/Hardware/Production)
 
 - ## ESP 360 Remote on [Discord](https://discord.gg/PsrK3KDkRy)