diff --git a/Hardware/Production/readme.md b/Hardware/Production/readme.md
index 01005dc..8eabf9c 100644
--- a/Hardware/Production/readme.md
+++ b/Hardware/Production/readme.md
@@ -1,5 +1,6 @@
- I suggest you to buy also the right angle pin I soldered on the RF modules. 
- I used [these](https://www.lcsc.com/product-detail/_XFCN-_C781823.html) for the 3-pin transmitter module (STX883s). 
+ I suggest you to buy also the right angle pin I soldered on the RF modules.
+ 
+ - I used [these](https://www.lcsc.com/product-detail/_XFCN-_C781823.html) for the 3-pin transmitter module (STX883s). 
  They have the standard pitch of 2.54 but they are thin enough to be inserted in the female connector on the board  **You have to buy at least 4 (2x2)** and then cut one. 
  
- For the receiver module (SRX883s), pins are [these](https://www.lcsc.com/product-detail/_HCTL-_C2905972.html). Also with these you have to cut one (I connected it to the board only with 5 pins out 6)
+ - For the receiver module (SRX883s), pins are [these](https://www.lcsc.com/product-detail/_HCTL-_C2905972.html). Also with these you have to cut one (I connected it to the board only with 5 pins out 6)