From 8ce77c5f31041b264bb68e8703c6671b7edf2062 Mon Sep 17 00:00:00 2001
From: ale1800 <53172176+ale1800@users.noreply.github.com>
Date: Sun, 16 Mar 2025 10:09:46 +0100
Subject: [PATCH] Update readme.md

---
 Hardware/Production/readme.md | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/Hardware/Production/readme.md b/Hardware/Production/readme.md
index 8eabf9c..d10112a 100644
--- a/Hardware/Production/readme.md
+++ b/Hardware/Production/readme.md
@@ -1,6 +1,10 @@
  I suggest you to buy also the right angle pin I soldered on the RF modules.
  
- - I used [these](https://www.lcsc.com/product-detail/_XFCN-_C781823.html) for the 3-pin transmitter module (STX883s). 
+ - I used [these](https://www.lcsc.com/product-detail/_XFCN-_C781823.html) for the 3-pin transmitter module ([STX883Pro]((https://www.nicerf.com/ask-modules/ask-transmitter-module-stx883pro.html))). 
  They have the standard pitch of 2.54 but they are thin enough to be inserted in the female connector on the board  **You have to buy at least 4 (2x2)** and then cut one. 
  
- - For the receiver module (SRX883s), pins are [these](https://www.lcsc.com/product-detail/_HCTL-_C2905972.html). Also with these you have to cut one (I connected it to the board only with 5 pins out 6)
+ - For the receiver module ([SRX883Pro](https://www.nicerf.com/ask-modules/ask-receiver-module-srx883pro.html)), pins are [these](https://www.lcsc.com/product-detail/_HCTL-_C2905972.html). Also with these you have to cut one (I connected it to the board only with 5 pins out 6)
+
+Pay attention if you need the RF modules in 433MHz or 315MHz version. And then buy the spring antenna accordingly, like [these ones](https://www.lcsc.com/products/Antennas_912.html).
+
+If you let the manufacturer assemble the board, remember to ask them to bend the IR leds to 45°, otherwise the will solder them straight.