From 01e5bc6b03d0b0a97dac704e0b155685c01bf7b1 Mon Sep 17 00:00:00 2001
From: ale1800 <53172176+ale1800@users.noreply.github.com>
Date: Sun, 15 Sep 2024 09:53:12 +0200
Subject: [PATCH] Add files via upload

---
 ESPHome/esp360remote.yaml | 181 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 181 insertions(+)
 create mode 100644 ESPHome/esp360remote.yaml

diff --git a/ESPHome/esp360remote.yaml b/ESPHome/esp360remote.yaml
new file mode 100644
index 0000000..1617e7b
--- /dev/null
+++ b/ESPHome/esp360remote.yaml
@@ -0,0 +1,181 @@
+substitutions:
+  name: "esp360remote"
+  friendly_name: "ESP360Remote"
+  project_name: "ale1800.ESP360Remote"
+  project_version: "2.0"
+
+esphome:
+  name: "${name}"
+  name_add_mac_suffix: true
+  project:
+    name: "${project_name}"
+    version: "${project_version}"
+
+esp32:
+  board: esp32dev
+  framework:
+    type: arduino
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+  services:
+    - service: send_ir_raw
+      variables:
+        command: int[]
+      then:
+        - remote_transmitter.transmit_raw:
+            transmitter_id: IR_TX
+            code: !lambda 'return command;'
+    - service: send_rf_raw
+      variables:
+        protocol_number: int
+        raw_data: string
+        repeat_times: int
+        wait_time: int
+      then:
+        - remote_transmitter.transmit_rc_switch_raw:
+            transmitter_id: RF_TX
+            protocol: !lambda 'return  esphome::remote_base::RC_SWITCH_PROTOCOLS[protocol_number];'
+            code: !lambda 'return raw_data;'
+            repeat:
+              times: !lambda 'return repeat_times;'
+              wait_time: !lambda 'return wait_time;' 
+              
+ota:
+  - platform: esphome
+
+wifi:
+
+  # Enable fallback hotspot (captive portal) in case wifi connection fails
+  ap:
+    ssid: "${name}"
+    password: ""
+
+web_server:
+  port: 80
+
+# Sets up the improv via serial client for Wi-Fi provisioning
+improv_serial:
+
+
+dashboard_import:
+  package_import_url: github://ale1800/ESP-360-REMOTE/tree/main/ESPHome%20Configuration/esp360remote.yaml@main
+
+
+captive_portal:  
+
+#i2c bus definition
+i2c:
+  sda: 21
+  scl: 22
+  scan: true
+  id: bus_a
+
+#Offsets have been added to the measurements taken. 
+#These are necessary due to the heat generated by the PCB, the second layer of the board, and the case. 
+#This way, sufficiently accurate values are obtained for automations
+sensor:
+  - platform: shtcx
+    temperature:
+      name: "ESP360Remote Temperature"
+      filters:
+        - median: 
+            window_size: 5
+            send_every: 1
+        - offset: -3.7
+    humidity:
+      name: "ESP360Remote Humidity"
+      filters:
+        - median: 
+            window_size: 5
+            send_every: 1
+        - offset: +19.1   
+    address: 0x70
+    update_interval: 300s
+  - platform: bh1750
+    name: "BH1750 Illuminance"
+    filters:
+      - multiply: 5
+    address: 0x23
+    update_interval: 1s
+
+#Setting up IR and RF receivers
+remote_receiver:
+  - id: RF_RX
+    pin: 
+      number: GPIO5
+      inverted: True
+    dump: 
+#      - raw  #(delete # for raw data)
+      - rc_switch
+    tolerance: 35%
+    filter: 200us
+    idle: 4ms
+    buffer_size: 10kb
+    on_rc_switch:
+      - homeassistant.event:
+          event: esphome.rf_code_received_test
+          data:
+            protocol: !lambda 'return x.protocol;'
+            code: !lambda 'return x.code;' 
+  - id: IR_RX
+    pin: 
+      number: GPIO19
+      inverted: true
+      mode:
+       input: true
+       pullup: true
+    dump: all
+
+
+    on_raw:
+       - homeassistant.event:
+          event: esphome.ir_raw_code_received
+          data:
+            code: !lambda '
+            reverse(x.begin(), x.end());
+            std::string str = "";
+            for (auto it = x.begin(); it != x.end(); ++it)
+            {
+              str += to_string(*it);
+              str += ",";
+              if (it != x.end() - 1) str += " ";
+            }
+            if (str.size() > 0)  str.erase( str.end() - 2);
+            return esphome::to_string("[" + str + "]");'   
+    on_pronto:
+       - homeassistant.event:
+          event: esphome.ir_pronto_code_received
+          data:
+            code: !lambda 'return x.data;'
+    on_lg:
+       - homeassistant.event:
+          event: esphome.ir_lg_code_received
+          data:
+            data: !lambda 'return x.data;'
+            nbits: !lambda 'return x.nbits;'
+    on_panasonic:
+       - homeassistant.event:
+           event: esphome.ir_panasonic_code_received
+           data:
+            address: !lambda 'return x.address;'
+            command: !lambda 'return x.command;'
+
+#Setting up IR and RF transmitters
+remote_transmitter:
+  - id: RF_TX
+    pin: GPIO18
+    carrier_duty_percent: 100%
+  - id: IR_TX
+    pin: GPIO13
+    carrier_duty_percent: 50%
+
+#Status LED 
+switch:
+  - platform: gpio
+    pin: 12
+    name: "Status Led"
+    restore_mode: ALWAYS_ON