This board boasts a RF transmitter and receiver, while IR LEDs are arranged in a circle to provide omnidirectional coverage. Additionally, it comes equipped with a temperature and humidity sensor, as well as an ambient light sensor. To top it off, the board can be powered and programmed through a USB Type-C port, which is ESD protected. Based on the ESP32-WROOM-32E, this board can be effortlessly configured with ESPHome, allowing for seamless control via Home Assistant.
You can swap the 433MHz modules with 315MHz ones because the SRX/STX882 modules come in both version with the same pinout, so you can choose which one fit your needs the best
Once you receive the ESP 360 Remote, if you don't have a running server of Home Assistant, you will need to follow the instructions in [INSTALL.md](INSTALL.md) to use the board as a "standalone" product.
ESP 360 REMOTE is designed to be fully integrated into Home Assistant and leverage the capabilities provided by ESPHome. If you decide to use the configuration file provided in this repo, you will see these exposed entities:
Thanks to the ease of use of ESPHome, you can create custom switches or integrate existing components (see https://esphome.io/components/climate/climate_ir.html) by directly modifying the yaml file, and all of this will be immediately visible on Home Assistant. Alternatively, if you want to take an even simpler route, you can use two integrated services to send raw IR and RF signals:
This way you won't need to tinker with the ESPHome configuration and you'll be able to send signals directly from your automations!
## Receiving signals
When the board receives an RF signal, the **esphome.rf_code_received** event will be triggered in Home Assistant. From there, you can directly see the protocol and code of the received signal. The same feature will soon be available for the infrared receiver as well.
ESPHome ensures compatibility with the widely-used SmartIR custom component for Home Assistant, thanks to its built-in support for transmitting raw signals. If you already have a SmartIR configuration in place, all you need to do is specify the appropriate service for transmitting signals and a code that is compatible with ESPHome. Here's an example of what your configuration.yaml file could look like:
The board is remarkably compact, measuring just 5cm in diameter and 3.5cm in height without the enclosure. This small form factor makes it a perfect fit for any space. To put its size into perspective, it's smaller than the Broadlink RM3 Mini, which is the only device I have available for comparison.
Within this repository, you can also access the two STL files for the enclosure, which enables you to print it in your preferred color to match its intended location. The pre-designed enclosure includes openings near the USB-C port and two built-in sensors to optimize airflow and cool down the temperature sensor. The top part of the enclosure can be screwed on, so there's no need for additional screws or components. I've only tested printing with light-colored PLA, and the IR transmission was not impacted at all. However, I can't make any claims about other materials or dark colors.
