esp360-remote/Quick start guide.md

INSTALLATION GUIDE FOR THE ESP 360 REMOTE


Step 1: Insert the base of the ESP 360 Remote into the case and make sure that all the openings align, as well as the 3 holes in the PCB with the 3 plastic pins.

<img src="https://github.com/ale1800/ESP-360-REMOTE/assets/53172176/99e91d97-18c2-4bf4-88d3-ab5241038916" alt="drawing" width="400" align="center"/>



Step 2: Insert the RF modules into the upper part of the PCB as shown in the picture and manually raise the infrared LEDs to a 45° angle. They are currently bent horizontally for transportation safety reasons.


<img src="https://github.com/ale1800/ESP-360-REMOTE/assets/53172176/396fba9e-86de-4aee-8a98-dd8b8ffd69ef" alt="drawing" width="400"/>



Step 3: Insert the top PCB all the way into the base through the 8-pin connector.


<img src="https://github.com/ale1800/ESP-360-REMOTE/assets/53172176/96065d77-3f68-4a1e-b87b-ad6fbb03f758" alt="drawing" width="400"/>



Step 4: Close the case by screwing the top part, plug in the power cable, and wait for the board’s hotspot called Esp360Remote or Esp360Remote2 (if you ordered the teo pack) to appear!


<img src="https://github.com/ale1800/ESP-360-REMOTE/assets/53172176/febf8f96-023a-4d50-a6e5-ef75f0398531" alt="drawing" width="400"/>




Step 5: When the fallback hotspot is available, connect to it with Esp360Remote as password (for both of the AP’s name)

<img src="https://github.com/ale1800/ESP-360-REMOTE/assets/53172176/5ca4367c-1ca0-4e2a-a59f-f606ede298c7" alt="drawing" width="400"/>



Step 6: After connecting to its hotspot, go to ip: 192.168.4.1 on your web browser, connect to your WiFi and you are done! Home Assistant should have now discovered your Esp 360 Remote!

<img src="https://github.com/ale1800/ESP-360-REMOTE/assets/53172176/5ade3c7b-8f48-4860-b651-d4625bd73d51" alt="drawing" width="400"/>